quality_Daikin parts_York connecting rod_Copeland D6 Piston

09-22 

Piston Manufacturing Process

Piston manufacturing requires the use of piston materials. Several basic requirements for piston material selection. The alloy has low thermal expansion coefficient and good volume stability when alternating cold and heat;

09-15 

Aluminum Piston Material Requirements

In modern internal combustion engines, especially diesel engines, in order to greatly improve their thermal efficiency, the degree of supercharging is constantly increasing, which makes the thermal load inside the cylinder significantly increase.

09-08 

The role of the piston

The piston of the engine is one of the main parts in the engine. It forms a piston group with piston rings, piston pins and other parts, and forms a combustion chamber together with the cylinder head,

09-01 

What are the two modes of movement of the piston

The reciprocating engine combines the inhaled air with the atomized fuel in the cylinder to form a combustible mixture, which is compressed and then burned. Circular motion, thereby outputting power.

08-24 

How to divide the direction when the piston is installed

Piston rings generally have letters or numbers, with one side facing up, no signs and no specific direction regulations, and oil rings are not divided into positive and negative sides.

08-16 

What are the types of pistons

The main function of the piston is to withstand the combustion pressure in the cylinder and transmit this force to the crankshaft through the piston pin and connecting rod.