quality_Daikin parts_York connecting rod_Copeland D6 Piston



language 

中国

韩国



NEWS

Ningbo Haishu YinLian Machinery Co.,Ltd

Homepage

Bitzer piston parts News

04-07 

Bitzer 4TC piston supplier introduces that the overhaul of the piston assembly is necessary

Bitzer 4TC piston supplier tells you: the piston ring installed on the engine piston is divided into two types: air ring and oil ring. The gas ring is located on the upper part of the piston, and each piston of the engine is equipped with 2 to 3 gas rings to seal the combustion chamber and prevent high-temperature gas from leaking, resulting in insufficient compression pressure of the engine due to gas leakage. The oil ring plays the role of oil distribution and oil scraping, which not only lubricates the surface of the cylinder, but also prevents the oil from entering the combustion chamber.

03-29 

Bitzer 4TC piston maintenance tips

If the surface of Bitzer 4TC piston has obvious burns, nicks, or obvious protrusions along the axial direction, it should be replaced with a new one. Use an outside micrometer to measure the diameter of the piston pin. Generally, when the radial wear is less than 0.05 mm, it can be ground to a smaller size and then repaired by chrome plating or iron plating; the piston pin can also be heated to restore its size by swelling. When the radial wear is greater than 0.05 mm, it is generally replaced.

03-23 

Bitzer 4TC piston maintenance tips

Today I will explain to you the maintenance of Bitzer 4TC piston, piston pin and piston pin lock ring. The piston is divided into top, head and skirt. The main damage of the piston is the wear and carbon deposition of the piston ring groove, the wear of the piston skirt, and the carbon deposition and burning loss of the top of the piston. When overhauling, first visually inspect the piston for burns, scratches, and ring groove edges for broken edges, and then use measuring tools to check the wear and deformation of the piston ring groove and pin holes.

03-16 

Related product maintenance knowledge of Cheap Bitzer 4TC piston

Many people want to buy Cheap Bitzer 4TC piston. Before that, let's take a look at the maintenance instructions of the cylinder liner and piston assembly. The piston ring should rotate freely and flexibly in the ring groove without stagnation, and the outer circular surface is generally not higher than the outer circular surface of the piston ring bank.

03-09 

Bitzer 4VC Piston Manufacturers china introduces product maintenance instructions

Bitzer 4VC Piston Manufacturers china tells you the maintenance instructions of the cylinder liner piston assembly. When installing the cylinder liner, special tools must be used to press it smoothly, and hard knocking or rough installation is not allowed, so as to avoid deformation of the cylinder liner and damage to related parts.

03-03 

Bitzer 4VC Piston Manufacturers china introduces product maintenance instructions for you

Bitzer 4VC Piston Manufacturers china introduces the maintenance instructions for cylinder liner and piston components: 1. Check whether the purchased assembly model matches the engine model. 2. After the product is unpacked, check the appearance of the assembly (cylinder liner, piston, piston ring, piston pin, etc.), and confirm that there is no quality problem, no accidental damage, no mixed packaging or fake and inferior products before use.

搜索

Specialized in manufacturing various air compressors, refrigerant compressor, patrol engine connecting rods, piston, aluminum die cast parts and cast aluminum.

ABOUT

PRODUCTS

Oil-Free Air Compressor Connecting Rod

News

Company News