The main points for attention when assembling Bitzer 4PC piston kit are as follows:

1. It is best to use a press when installing the Bitzer 4PC piston kit, or use pliers. Do not hit with a hammer; the oil hole or groove on the copper sleeve and the oil hole on the connecting rod must be aligned to ensure its lubrication .

2. Assemble Bitzer 4PC piston kit. When assembling Bitzer 4PC piston kit, pay attention to their relative position and orientation.

Three, cleverly install the piston pin. The piston pin and the pin hole are interference fit. When installing, first put the piston in water or engine oil and heat it to 90℃~100℃ evenly. After taking it out, put the pull rod in the appropriate position between the piston pin seat holes, and then install the piston pin coated with organic oil in the predetermined direction. Into the piston pin hole and the connecting rod copper sleeve.

4. Installation of Bitzer 4PC piston kit piston ring. When installing piston rings, pay attention to the position and sequence of the rings.

5. Install Bitzer 4PC piston kit.

Bitzer 4PC piston kit, as a typical key component, has strong process characteristics in cutting processing. Therefore, special equipment has become the key equipment for Bitzer 4PC piston kit cutting processing, and its function and accuracy will directly affect the quality indicators of the key characteristics of the final product.