How to overhaul the Copeland D6 Piston?
- Categories:Copeland Piston News
- Author:
- Origin:
- Time of issue:2022-11-28
- Views:0
(Summary description)When the Copeland D6 Piston is severely worn, the elasticity is weakened or the clearance increases, it will cause the compressor's lubricating oil consumption to increase and the cooling capacity to decrease. During inspection, the Copeland D6 Piston should be removed for visual inspection and a micrometer should be used for inspection.
How to overhaul the Copeland D6 Piston?
(Summary description)When the Copeland D6 Piston is severely worn, the elasticity is weakened or the clearance increases, it will cause the compressor's lubricating oil consumption to increase and the cooling capacity to decrease. During inspection, the Copeland D6 Piston should be removed for visual inspection and a micrometer should be used for inspection.
- Categories:Copeland Piston News
- Author:
- Origin:
- Time of issue:2022-11-28
- Views:0
When the Copeland D6 Piston is severely worn, the elasticity is weakened or the clearance increases, it will cause the compressor's lubricating oil consumption to increase and the cooling capacity to decrease. During inspection, the Copeland D6 Piston should be removed for visual inspection and a micrometer should be used for inspection. When one of the following situations occurs, it should be replaced with a new one.
(1) When the radial wear of Copeland D6 Piston is more than 1mm;
(2) When the axial wear of Copeland D6 Piston is above 0.2mm;
(3) When the axial clearance of Copeland D6 Piston in the ring groove exceeds 0.06~0.1mm;
(4) When the total length of the clearance between the Copeland D6 Piston surface and the cylinder mirror surface exceeds 30% of the cylinder circumference;
(5) When the Copeland D6 Piston is severely worn and loses its elasticity.
Since the temperature and lubrication conditions of the several rings on the Copeland D6 Piston are different during the compressor operation, the first ring wears faster under normal circumstances, but because the thickness of the new and old rings is different, if only the first ring is replaced , It is not good for the sealing of the cylinder, so it is best to replace all the rings on a Copeland D6 Piston together when changing the rings.
Scan the QR code to read on your phone
Search
Specialized in manufacturing various air compressors, refrigerant compressor, patrol engine connecting rods, piston, aluminum die cast parts and cast aluminum.
Contact
Tel: 0086-574-88025888 88025555(switchboard)
Fax: 0086-574-88025632 88025555-805
Contact:Otto Chen 13305747386 Jason Xie 13456167092
Email:chaochao@cccr-nb.com chaochaosales@163.com
Copyright © 2020 Ningbo Haishu YinLian Machinery Co.,Ltd All rights reserved. Powered by www.300.cn 浙ICP备19046447号