1. Install the piston pin of the connecting rod into the pin hole of the Bitzer 4PC piston kit;

2. Install the piston ring into the ring groove on the piston;

3. Insert the installed connecting rod and piston into the cylinder from the top of the cylinder and the connecting rod head downwards, tighten the piston ring with a special clamp for installing the piston ring, and then gently push it into the cylinder liner;

4. The connecting rod shell of Bitzer 4PC piston kit is installed on the connecting rod journal, and its two fastening bolts, pay attention to the direction of the body;

5. Tighten the two bolts of the connecting rod tile to the required torque;

6. Install the cylinder head and adjust the valve clearance;

7. Install the oil pump and install the oil pan.

The above is the summary of the installation method of the Bitzer 4PC piston kit. I hope our summary will be helpful to you.